The tenth process of magnet production process: chamfering

The black pieces of the magnet blank after slicing are bonded with 502 glue on them. In order to separate them, they need to be boiled in boiling water to remove the cutting oil and separate the glue for subsequent inspection and chamfering and electroplating. The inspection of black flakes is to inspect the semi-finished products after cooking and drying. The thickness of the round flakes is 0.05mm and that of the square is 0.07mm, or the inspection standard is formulated according to the requirements of the finished products of the guests. After passing the inspection, the black sheet will be sent to the chamfering room for chamfering. Chamfering is the first smooth process of electroplating. In order to grind the right angle around the product to a certain radian according to the customer's requirements, and at the same time make the surface of the black sheet smoother and more

The black sheet of the magnet blank after slicing,502The glue is bonded to each other. In order to separate them, you need to put boiling water to boil, remove the cutting oil, and separate the glue for subsequent inspection and chamfering and electroplating.

The inspection of black flakes is the inspection of semi-finished products after cooking and drying.±0.05mm, square in0.07mm, or according to the requirements of the guest finished product to develop inspection standards.

After passing the inspection, the black sheet will be sent to the chamfering room for chamfering. Chamfering is the first step of electroplating. In order to grind the right angle around the product to a certain radian according to the customer's requirements, at the same time, the surface of the black sheet will be smoother, the adhesion of the electroplating layer will be increased, and the surface of the electroplating layer will be smoother.

Source: magnet manufacturers Youlian Magnetic Industrywww.youliancy.com

Hot News

24/04/15

Ferrite magnet main parameters and grade data sheet (comprehensive)

24/04/15

How much money a powerful magnet?

How much does a strong magnet cost? How much does a ton of strong magnets cost? Often you can see posts on web pages asking and answering such questions, but what about the answer? You will find that some promotional companies have not responded positively to this question. Why is it difficult to quote the price of magnets? Or something else? As the third-generation permanent magnet material, NdFeB has the advantages of small size, light weight, and strong magnetism, and is widely used in all walks of life. NdFeB magnet is by far the best performance to price ratio of the magnet. So what is the price of a strong magnet? Unlike other products, there is no clear price for high-strength magnets.

24/04/15

Is NdFeB magnet harmful to people?

The magnetic induction intensity of ordinary magnets is not high and will not cause harm to the human body. If you 've been working on a part for a long time and it's still being studied, it's as mysterious as acupuncture, as if it's more mysterious than acupuncture. However, because the CRT is generated by scanning the electron current under the deflection of the magnetic field, it interferes with the CRT. The applied magnetic field distorts the magnetic field in the imaging tube, causing the electron flow to deviate from the normal scanning trajectory. Causes image distortion (black and white and color display) and mottling (color display only). General multimedia speakers use magnetic shielding technology, placed next to the CRT will not cause any impact, but take out the horn magnetic

24/04/15

The harm of magnet toys to children